Medical waste collection and transport
Marius Pedersen Group provides medical facilities with a whole complex of medical waste disposal services. In the field, we emphasize compliance with the legislation in force, work safety and hygiene.
We can satisfy the needs and requirements of all types of medical facilities from small private surgeries to big hospitals.
While handling medical waste we observe the following principles:
- safety of patients and medical personnel when waste is produced and handled,
- supply of a wide variety of containers for waste storage while respecting the needs of the facility,
- cost-effectiveness of waste management for medical facilities,
- simplicity of the waste management system,
- compliance with the legislation in force.
The fundamentals of operating reliability reside in its simplicity. Containers are placed directly where waste is produced (e.g. surgery, operating theatre, laboratory) in order to minimize handling of „unpacked“ waste.
If it is useful and profitable, we can provide waste originators with a storage device equipped with a cooling system.
Subsequently, waste is transported from medical facilities to an incineration plant on a regular basis or on demand according to the current need of the customer.
The following is an overview of waste specific to medical facilities:
- bandages,
- nappies,
- articles soiled with blood,
- infusion sets,
- cytostatics,
- diagnostic aids,
- empty pharmaceutical packaging,
- vaccine packaging,
- ampoules,
- needles,
- knives,
- scalpels,
- soiled orthopedic casts,
etc.
Catalogue of containers
-
Rubbish skips
- capacity: 5m3, 7m3, 10m3
- external dimensions (width x length x height from the ground):
1,93 x 3,4 x 1,4m/1,5m/1,93m
- material: steel container (MPG type)
- payload: 9t
- colour: blue (DM MPG type)
- note: with a lid/open
-
JNK CTS containers
- capacity: 3m3, 8m3, 14m3
- external dimensions (width x length x height from the ground):
2,2 x 4,0 x 0,6m/1,5m/2,3m
- material: steel container complying with CTS standards
- payload: 9t
- colour: blue (DM MPG type)
- note: open/ covered/ special
-
MSTS containers
- capacity: 7m3, 10m3, 15m3, 20m3, 23,5m3
- external dimensions (width x length x height from the ground):
2,55 x 4,593 x 0,9m/1,2m/1,7m/2,2m/2,6m
- material: steel container complying with M.S.T.S standards
- payload: 18t
- colour: blue (DM MPG type)
- note: open/ covered/ special
-
ABROL containers
- capacity: 9m3, 16m3, 20m3, 25m3, 34m3, 38m3, 41m3
- external dimensions (width x length x height from the ground):
2,55 x 6,89 x 0,78m/1,3m/1,5m/1,8m/2,4m/2,64m/2,9m
- material: steel container comlying with DIN 30722 standard
- payload: 18t
- colour: blue (DM MPG type)
- note: open/ covered/ special
-
Drum with a lid (60l)/open top
- capacity: 60l
- external dimensions (width x length x height from the ground):
diameter 370mm x height 590mm
- material: black/zinc-coated sheet metal
- payload: 100kg
- colour: blue/silver sheet metal
- note: UN ADR
- link: http://www.mevatec.cz
-
Drum with a lid (220l)/open top
- capacity: 220l
- external dimensions (width x length x height from the ground):
diameter 581mm x height 935mm
- material: PE plastic
- payload: 100kg
- colour: blue
- note: UN1H1/Y1.8/200/ROK/D/BAM9640-M
- link: http://www.mevatec.cz
-
Drum with a lid (30l)
- capacity: 30l
- external dimensions (width x length x height from the ground):
diameter 315mm x height 580mm
- material: PE plastic
- payload: 50kg
- colour: blue
- note: UN1H2/X61/S/ROK/D/BAM9815-M
- link: http://www.mevatec.cz
-
Drum with a lid (60l)
- capacity: 60l
- external dimensions (width x length x height from the ground):
diameter 400mm x height 628mm
- material: PE plastic
- payload: 100kg
- colour: blue
- note: UN1H2/X88/S/ROK/D/BAM8631-M
- link: http://www.mevatec.cz
-
Drum with a lid (120l)
- capacity: 120l
- external dimensions (width x length x height from the ground):
diameter 492mm x height 800mm
- material: PE plastic
- payload: 150kg
- colour: blue
- note: UN1H2/X186/S/ROK/D/BAM4754-M
- link: http://www.mevatec.cz
-
Drum with a lid (220l)
- capacity: 220l
- external dimensions (width x length x height from the ground):
diameter 590mm x height 975mm
- material: PE plastic
- payload: 250kg
- colour: blue
- note: UN1H2/X318/S/ROK/D/BAM8418-M
- link: http://www.mevatec.cz
-
KCA box for discarded batteries and pharmaceuticals
- capacity: 20l
- external dimensions (width x length x height from the ground):
280x240x460mm
- material: PE plastic
- payload: 20kg
- colour: red and black
- link: http://www.mevatec.cz
-
Metal container for solid or soft hazardous waste 500/800 litres
- capacity: 500l / 800l
- external dimensions (width x length x height from the ground):
1,200x1,000x910mm/1,290mm
- material: steel container
- payload: 1,000kg / 1,500kg
- colour: blue/silver sheet metal
- note: UN 11A/Y/r.výr.CZ/MV - IMET 4036/4320/1200/5001/180 kg/ocel3/výr.č.
- link: http://www.mevatec.cz
-
Plastic container for liquid hazardous waste 600/1,000 litres
- capacity: 600l / 1000l
- external dimensions (width x length x height from the ground):
1200x1000x1005/1170mm
- material: HDPE plastic container in a metal cagel
- payload: 1200kg / 2000kg
- color: white plastic
- note: UN ADR
- link: http://www.mevatec.cz
-
Bigbox with a lid for solid or soft hazardous waste
-
Container for fluorescent tubes
- capacity: 640l
- external dimensions (width x length x height from the ground):
1,600x500x800mm
- material: steel container
- payload: 150kg
- colour: blue
- note: UN11A/Y/xxxx/CZ/MV-IMET
- link: http://www.mevatec.cz
-
Hazardous waste bags
- capacity: 120l
- external dimensions (width x length x height from the ground):
700x1100x0,2mm
- material: PE containing recycled material
- payload: 40kg
- colour: red or black
- note: used inside containers
- link: http://www.mevatec.cz
-
Box for medical waste MP95
- capacity: 56l
- external dimensions (width x length x height from the ground):
400x300x520mm
- material: special three-layer 4G cardboard with an interlocking lid
- payload: 11kg
- colour: grey-white cardboard
- note: UN 4G/Y11/S/xxxx/CZ/BUPAK-IMET0021 property of MP a.s.
-
Medical waste containers - sharp objects
- capacity: 0,5 - 2,5l
- material: eco-friendly polypropylene
- payload: 2kg
- colour: yellow with a red lid
- note: ADR – used inside containers
-
Medical waste container
Waste collection vehicles
-
A two-axle skip-carrier lorry
- total weight of the lorry: 18t
- maximum capacity of the lorry: 10m3
- payload including a container: 11t
- suitable for: rubbish skips
-
A two-axle skip-carrier lorry for one skip
- total weight of the lorry: 24t
- maximum capacity of the lorry: 20m3
- payload including a container: 17,5t
- suitable for: rubbish skips
-
A two-axle skip-carrier lorry for two skips
- total weight of the lorry: 42t
- maximum capacity of the lorry: 300m3
- payload including a container: 20t
- suitable for: rubbish skips
-
JNK CTS container lorry
- total weight of the lorry: 10,5t
- maximum capacity of the lorry: 14m3
- payload including a container: 15,5t
- suitable for: JNK CTS
-
A truck-trailer combination – a carrier of JNK CTS container with an air-braked trailer
- total weight of the lorry: 17t
- maximum capacity of the lorry: 28m3
- payload including a container: 10,5t
- suitable for: JNK CTS
-
MSTS container lorry
- total weight of the lorry: 18t
- maximum capacity of the lorry: 23m3
- payload including a container: 9t
- suitable for: MSTS
-
ABROL container lorry
- total weight of the lorry: 26t
- maximum capacity of the lorry: 38m3
- payload including a container: 13,5t
- suitable for: ABROL/MSTS
-
A box truck for transport of dangerous waste
- total weight of the lorry: 3,5t and 5t
- maximum capacity of loading space: 6,5m3
- payload: 0,7t
- loading space inner dimensions (width x length x height): 1,75 x 2 x 1,9m
-
A flatbed truck for transport of dangerous waste, with a tilt and rear loader
- total weight of the lorry: 10,5t
- maximum capacity of loading space: 29m3
- payload: 4,6t
- loading space inner dimensions (width x length x height): 2,48 x 5,7 x 2,1m
- note: lifting capacity of rear loader - 2t
-
A truck - trailer combination – a flatbed truck for transport of dangerous waste with a tilt, rear loader and flatbed trailer
- total weight of the lorry: 17t
- maximum capacity of loading space: 71m3
- payload: 15t
- loading space inner dimensions (width x length x height):
truck 4.4 as above + 7,5 x 2,48 x 2,31
-
A flatbed truck for transport of dangerous waste with a tilt and rear loader
- total weight of the lorry: 15t
- maximum capacity of loading space: 35m3
- payload: 8,5t
- loading space inner dimensions (width x length x height): 2,48 x 6,5 x 2,1m
- note: lifting capacity of rear loader - 2t
-
A truck - trailer combination – a flatbed truck for transport of dangerous waste with a tilt, rear loader and flatbed trailer
- total weight of the lorry: 30t
- maximum capacity of loading space: 77m3
- payload: 19t
- loading space inner dimensions (width x length x height):
truck 4.6 as above + 7,5 x 2,48 x 2,31